FUTABA 3PKS Instruction Manual page 85

Using the up timer
(Preparation)
Select the setting item "TYPE" by (JOG) button up or down
operation. Press the (+) or (-) button and select "UP TIMER".
1
(Alarm time setting)
Select the setting item "ALRM"by (JOG) button up, down,
left, or right operation and set
the alarm time with the (+) and
(-) buttons.
(Pre alarm time setting)
Select the setting item "PRAL"
by (JOG) button up, down, left, or right operation, and set the
pre alarm time with the (+) and (-) buttons.
2
(Timer start/stop operation)
When the switch ("LAP START") assigned by function select
switch function is pressed, the
timer star ts. Stop the timer
with the same switch ("LAP
START") as start, or with the
switch assigned the "LAP RE-
SET" function.
- Linking only start to the throttle trigger
Select the setting item "RST" by (JOG) button up, down, left,
or right operation and press the (+) and (-) buttons simultane-
ously for about 1 second. When the set beeps and the status
display switches from "RST" to blinking "RDY", the system
enters the trigger operation ready state. When the trigger is
operated at the forward side, the timer starts. (Status display
"RUN")
3
(Timer reset operation)
When the switch ("LAP RESET") assigned by function select
switch function is pressed, the
timer is reset. Select the sta-
tus display ("RUN", "STP", or
"RDY") by (JOG) button up or
down operation and press the
(+) and (-) buttons simultaneously for about 1 second. The
set beeps and the status display changes to "RST" and the
timer resets.
Timer Function "TIMER"
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.
- Press the (+) and (-) buttons
simultaneously (approx. 1 sec)
to return to the initial screen.
Alarm time (ALRM)
OFF, 1 ~ 99 m
Initial value: 8 m
Prealarm time (PRAL)
OFF, 1 ~ 30 s
Initial value: OFF
Status display
RST :Reset state
RDY :Throttle trigger operation wait
RUN :Timer running
STP : Timer stopped
Switches
LAP START :start / stop
LAP RESET :stop / reset
Status display
RST :Reset state
RDY :Throttle trigger operation wait
RUN :Timer running
STP : Timer stopped
85