FUTABA 3PKS Instruction Manual page 84

Calling the setup screen
*Calling from menu screen
(Opening Screen)
MENU 1
MENU 2
Press t
* When the direct call button is set,
the setup screen is also called by the
following method:
(Opening Screen)
DIRECT SEL
Press the button set
at this function.
Operation display
While the TIMER function is operating,
menu screen.
Racing timer type selection
(Preparation)
Assign the "LAP START" switch using the function select
switch (p.79). When resetting by switch, assign "LAP RESET"
also.
1
(Racing timer type selection)
Select the setting item "TYPE" by (JOG) button up, down,
left, or right operation. Press the (+) or (-) button and set the
racing timer type.
Timer selection (TYPE)
UP TIMER
DOWN TIMER
LAP MEMORY
LAP NAVIGATE
2
When ending setting, return to the initial screen by pressing
the (END) button twice (for direct selection, press the (END)
button once).
- Read the later descriptions for the operation method by type.
84
Menu screen call
by button
MENU1/2 selection
by button
Select the function
by button
he button
Press t
he button
: Up timer
: Down timer
: Lap timer
: Navigate timer
•Select the setting item by
button
* b l i n k s a t t h e c u r r e n t
setup item.
is displayed on the initial screen and
T I M
Timer Function "TIMER"
Timer selection
First, select the type of
timer at the "TYPE" item.
The setup screen varies
depending on the type of
timer. This figure shows the
UP TIMER setup screen.
Time display
Minute display (m)
Second display (s)
1/100 second display
Setup item selection
- Select by (JOG) button up,
down, left or right operation.
Adjustment buttons
- Use the (+) and (-) buttons to
make adjustments.