Access Point Layout And Connectors - Cisco 1130AG - Aironet - Wireless Access Point Hardware Installation Manual

Deploying the Access Points on the Wireless Network
For lightweight access points, after your access points are deployed, ensure that your controller is not
Step 4
configured as a master controller. A master controller should only be used for configuring access points
and not in a working network.

Access Point Layout and Connectors

Figure 2-1
Figure 2-1
1
3
1
2
3
4
There is a second keyhole slot located on the bottom of the unit near the security slot.
Note
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
2-6
identifies the main access point hardware features.
Access Point Hardware Features
2
4
5
48-VDC power port
Ethernet port (RJ-45)
Keyhole slot
Console port (RJ-45)
8
6
7
5 Padlock post
6 Mode button
7 Ethernet (E) and radio (R) LEDs
8 Status LED
Chapter 2 Installing the Access Point
OL-8369-05