Access Point Layout And Connectors; Leds - Cisco AIR-AP1120B-A-K9 - Aironet 1100 Series Access Point Hardware Installation Manual

Basic Installation Guidelines

Access Point Layout and Connectors

Figure 2-1
Figure 2-1
1
2
3

LEDs

The three LEDs on the top of the access point report Ethernet activity, association status, and radio
activity.
•
•
•
Figure 2-2
Figure 2-2
Ethernet
Status
Radio
Cisco Aironet 1100 Series Access Point Hardware Installation Guide
2-4
shows the access point layout and connectors.
Access Point Layout and Connectors
1 2 3 4 5
48-VDC power port
Ethernet port (RJ-45)
Cable lock slot
The Ethernet LED signals Ethernet traffic on the wired LAN.
The status LED signals operational status.
The radio LED signals wireless traffic over the radio interface.
shows the three status LEDs.
Access Point LEDs
6
4 Mode button
5 Status LEDs
6
Antenna
Chapter 2 Installing the Access Point
OL-4309-07