Chapter 4
Troubleshooting Lightweight Access Points
Figure 4-1
1
Status LED
2
Access point cover
To view the Ethernet and Radio LEDs you must open the access point cover (refer to the
Note
Access Point Cover" section on page
When the access point cover is opened, the Status LED colors are not visible.
Note
Regarding LED status colors, it is expected that there will be small variations in color intensity and hue
Note
from unit to unit. This is within the normal range of the LED manufacturer's specifications and is not a
defect.
OL-8369-05
Access Point LEDs
1
2
3
4
2-11).
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
Checking the Lightweight Access Point LEDs
3
Ethernet LED
4
Radio LED
"Opening the
4-3