Hardware Features; Access Point Views, Ports, And Connectors; Connectors And Ports On The Ap - Cisco Catalyst Wireless 9163E Manual

Hardware Features

This section describes the hardware features of the CW9163E-x models:
•
•
•

Access Point Views, Ports, and Connectors

Cisco Catalyst Wireless 9163E Series Outdoor AP has various externally accessible ports and connectors that
you can use to install antennas on the AP. For information about connectors and ports for this AP, see
Connectors and Ports on the AP, on page
Note

Connectors and Ports on the AP

The following illustrations show the different connectors and ports available on the base and sides of the AP.
Access Point Views, Ports, and Connectors, on page 5
Supported External Antennas, on page 7
Power Sources, on page 9
The illustrations in this document show all the available connections for the AP. The connector plugs seal the
unused connection ports to ensure that the AP is watertight. Liquid-tight adapters are provided for connector
openings. You can install the adapters before or after deploying the AP.
Cisco Catalyst Wireless 9163E Access Point Hardware Installation and Deployment Guide
C H A P T E R
5.
2
5