Cisco 1130AG - Aironet - Wireless Access Point Hardware Installation Manual page 104

Table C-1 Access Point Specifications (continued)
802.11g Radio Specifications
Category 802.11b Operation
Power Output 100 mW (20 dBm)
50 mW (17 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)
(Depending on the regulatory
domain in which the access
point is installed)
Antenna A diversity system with two integrated 3-dBi antennas.
Frequency 2.400 to 2.497 GHz
(Depending on the regulatory domain in which the access point is
installed)
Modulation Complementary Code Keying
(CCK)
Subcarrier modulation BPSK (1 Mbps)
QPSK (2 Mbps)
CCK (5.5 and 11 Mbps)
Data rates 1, 2, 5.5, and 11 Mbps
Typical indoor range 450 ft at 1 Mbps
360 ft at 11 Mbps
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
C-2
802.11g Operation
50 mW (17 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)
(Depending on the regulatory
domain in which the access point
is installed)
Orthogonal Frequency Division Multiplex (OFDM)
BPSK (6 and 9 Mbps)
QPSK (12 and 18 Mbps)
16-QAM (24 and 36 Mbps)
64-QAM (48 and 54 Mbps)
6, 9, 12, 18, 24, 36, 48, and 54 Mbps
400 ft at 6 Mbps
100 ft at 54 Mbps
Appendix C Access Point Specifications
802.11a Radio Specifications
Autonomous access points
50 mW (17 dBm)
30 mW (15 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)
Lightweight access points
50 mW (17 dBm)
25 mW (14 dBm)
10 mW (11 dBm)
5 mW (8 dBm)
3 mW (5 dBm)
2 mW (2 dBm)
1 mW (-1 dBm)
(Depending on the regulatory
domain in which the access point
is installed)
A diversity system with two
integrated 4.5-dBi antennas.
5.15 to 5.25 GHz
5.25 to 5.35 GHz
5.725 to 5.85 GHz
(Depending on the regulatory
domain in which the access point
is installed)
BPSK (6 Mbps and 9 Mbps)
QPSK (12 Mbps and 18 Mbps)
16-QAM (24 and 36 Mbps)
64-QAM (48 and 54 Mbps)
325 ft at 6 Mbps
80 ft at 54 Mbps
OL-8369-05