Browser Tftp Interface; Obtaining The Access Point Image File - Cisco 1130AG - Aironet - Wireless Access Point Hardware Installation Manual

Chapter 3 Troubleshooting Autonomous Access Points

Browser TFTP Interface

The TFTP interface allows you to use a TFTP server on a network device to load the access point image
file. Follow these instructions to use a TFTP server:
Step 1 Open your Internet browser.
Note
Note
Enter the access point's IP address in the browser address line and press Enter.
Step 2
Step 3 At the prompt, enter the administrator username and password. The default username is Cisco and the
default password is Cisco. The username and password are case sensitive. The Summary Status page
appears.
Click the System Software tab and then click Software Upgrade. The HTTP Upgrade screen appears.
Step 4
Click the TFTP Upgrade tab.
Step 5
Enter the IP address for the TFTP server in the TFTP Server field.
Step 6
Enter the file name for the access point image file (such as c1130-k9w7-tar.123-8.JA.tar) in the Upload
Step 7
New System Image Tar File field. If the file is located in a subdirectory of the TFTP server root directory,
include the relative path of the TFTP server root directory with the filename. If the file is located in the
TFTP root directory, enter only the filename.
Click Upload .
Step 8
When a message appears that indicates the upgrade is complete, click OK.
Step 9
For additional information click the Help icon on the Software Upgrade screen.

Obtaining the Access Point Image File

The access point image file can be obtained from the Cisco.com software center using these steps:
Use your Internet browser to access the Cisco Software Center at the following URL:
Step 1
http://www.cisco.com/cisco/software/navigator.html
Click Access Points > Cisco Aironet 1130 AG Series.
Step 2
Click Cisco Aironet 1130AG Access Point.
Step 3
On the Enter Network Password window, enter your Cisco.com username and password and click OK.
Step 4
Click IOS.
Step 5
Choose the Cisco IOS release desired, such as 12.3.8.JA.
Step 6
Click WIRELESS LAN for an access point image file, such as c1130-k9w7-tar.123-8.JA.tar.
Step 7
OL-8369-05
The access point web-browser interface is fully compatible with Microsoft Internet Explorer
version 6.0 on Windows 98 and 2000 platforms and with Netscape version 7.0 on Windows 98,
Windows 2000, and Solaris platforms.
When using the access point browser interface, you should disable your browser pop-up blocker.
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide

Obtaining the Access Point Image File

3-19