Cisco 1130AG - Aironet - Wireless Access Point Hardware Installation Manual page 51

Troubleshooting Autonomous Access Points
This chapter provides troubleshooting procedures for basic problems with the autonomous access point
(model: AIR-AP1131AG or AIR-AP1131G). For the most up-to-date, detailed troubleshooting
information, refer torefer to the Cisco Technical Support and Documentation website at the following
URL:
http://www.cisco.com/cisco/web/psa/default.html
Sections in this chapter include:
Checking the Autonomous Access Point LEDs, page 3-2
•
Checking Basic Settings, page 3-4
•
Low Power Condition for Autonomous Access Points, page 3-6
•
Running the Carrier Busy Test, page 3-14
•
Running the Ping Test, page 3-15
•
Resetting to the Default Configuration, page 3-16
•
Reloading the Access Point Image, page 3-17
•
Obtaining the Access Point Image File, page 3-19
•
• Obtaining the TFTP Server Software, page 3-21
OL-8369-05
C H A P T E R
Cisco Aironet 1130AG Series Access Point Hardware Installation Guide
3
3-1