User Remote Control Key Functions - Zenith HCS5650 Installation And Operating Manual

User Remote Control Key Functions

A list of the keys and their functions on the optional user remote control, not supplied with the HD
Integrator Box System.
Turns sound Off and On, while the picture
Press and repeat to select a Channel
Memory Bank - - 1, 2, 3, or 4 (Standby).
Selects MTS sound: Mono, Stereo, and SAP
in analog mode. Change the audio
language in DTV mode.
CHANNEL PREVIEW
Displays available TV channels, and (if
active) the Guest Parental Control menu:
set V-Chip blocks to restrict both analog
and digital programming.
• Aux Channel allows the guest to select
the Audio / Video inputs. (Use the A/V
jacks on the back of the TV as a source).
Press to display current program
When selecting a digital broadcast
channel, key in the Main channel
number followed by the-> [-] -> then the
sub channel number. Analog channels do
not contain a sub channel number.
*Note: Bed 1 - Bed 2 switch on patient remote. The position of the Bed 1 - Bed 2 switch must correspond to the setting in the Installer's
menu. The switch above can be set by sliding it to the Bed 1 or Bed 2 position. On the patient's remote, the Bed 1 or Bed 2 position can be
selected by using a paper clip or a ball-point pen to slide the switch to the correct position.
Left position = Bed 1.
Right Position = Bed 2.
P A G E 2 0
MUTE
remains.
BANK
SAP
INFO
information.
[-] BUTTON
Optional Patient
Remote Control
POWER
Turns TV On or Off.
GUIDE
Use to view DTV program information.
CC(Closed Captioning)
Press to access closed captions.
VOLUME / CHANNEL / OK (Enter)
Increase or decrease sound level.
Select available channels.
Select on-screen menu items and change
menu values.
NUMBER BUTTONS
Use for direct channel entry.
FLASHBK (Flashback)
Use to return to the last channel
viewed.
ALARM
Use to go to the Alarm menu. Set a time
for the TV to turn itself on.
TIMER
Press repeatedly to select a preset time to
automatically shut the TV off.
BED 1/BED 2 (*See Note Below)
Determines the code set transmitted, Bed
1 or Bed 2. Switch setting must correspond
to item 27, HOSPITAL MODE setting in the
TV's Installer Menu.