Table of Contents
Advertisement
Channel Banks Setup For Hospital Applications
Channel Banks Overview
Purpose of Channel Banks: Allows the institution administrator to control access to
patient in-room TV programming. For Banks 1, 2 and 3, the institution can create
programming levels. Each level would offer a custom channel line-up. A channel bank
can then be enabled for a pre-determined fee. Top tier would be the most program-
ming, 2nd tier=lesser programming, 3rd tier=basic programming etc. Channel Bank 4
would display the 'Inactive TV Call Attendant' message when the TV is turned on. The
administrator could activate Banks 1, 2 or 3 depending on the programming tier
selected by the patient. When the patient leaves the hospital, the administrator can
then select Channel Bank 4 to reinstate the Inactive TV message.
Channel Banks Are Set Up After 2-5-5+Menu Procedure
Operating the Channel Banks menu. Press Ch Preview to access menu. Refer to remote
control key functions chart on next page for menu operation. Note: Installer Menu
item 028 Ch Overide must be set to 1 to access Channel Banks editing function.
Channels Available Charts
All channels found in the channel search are included in all channel banks. Default is
for all channels to be active in channel banks 1, 2, 3 and 4. Create channel banks
charts similar to the examples in the installation guide. Show on the chart, the sta-
tus for each channel in all channel banks. This becomes the programming plan.
Channel Number
1
2
Bank 1
BA
NA
Bank 2
BA
ND
Bank 3
BD
ND
Bank 4
BD
ND
NA= Normal Added ND=Normal Delete BA=Blank Added BD=Blank Deleted
Channel Status Options Available for Channel Banks
In the Ch Preview-Channel Banks menu, use the channel Up/Down arrows to
go to a channel and the Left/Right arrows to select the channel status.
Direct-enter deleted channel numbers. To access Aux sources use the
Up/Down arrows. See Channel Banks Status Chart on next page.
Inactive TV Setup
Go to Channel Bank 4. Select 'Normal Delete' for all channels and Aux
sources. When the TV is powered on by the patient, the 'Inactive TV Call
Attendant' message will appear on the screen and after a few moments the
TV will turn itself off. The administrator can activate Banks 1, 2 or 3
depending on the programming tier selected by the patient. When the
patient leaves the hospital, the administrator can then select Bank 4 to rein-
state the Inactive TV message. For pillow speaker operation, mute the audio
to remove Bank 4 sound. For activating banks, press Volume to restore
Audio.
P A G E 4 8
(Premium
(Barker
Channels)
Ch)
5
7
17
20
NA
NA
NA
NA
ND
NA
NA
NA
ND
ND
ND
NA
ND
ND
ND
ND
29
32
Aux
NA
NA
NA
NA
NA
NA
NA
ND
ND
ND
ND
ND
CHANNEL PREVIEW - BANK 1
CH 011-001
NORMAL-ADDED
Enter -> Change
CC ->VCHIP Menu Ch. Preview -> Exit
Advertisement
Table of Contents
Troubleshooting
