Zenith HCS5650 Installation And Operating Manual page 59

Installer Menu (Continued)
Installer Menu Items 031 through 117
Menu Item Function
031 POLL RATE
032 TIMING PULSE
034 CAMPORT EN
035 COMPPORT EN.
036 FRONT Y/C EN.
038 YPrPb EN.
039 REAR AUX EN
046 STRT AUX SRCE
047 AUX STATUS
053 DIS. CH-TIME
069 EN. CH-T COL.
070 FOR. CH-TIME
071 BCK. CH-TIME
073 CH NOT AVBLE
075 REVERT CH
077 QUICK SHUTOFF
078 UPN MSB
079 UPN MSB-1
080 UPN MSB-2
081 UPN LSB
082 CHKSM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
087 REAR RGB EN.
088 EN NOISE MUTE
091 YPrPb2 EN.
092 RGB2 ENABLE
094 SAP MENU EN
096 DEF. ASP. RATIO
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
105 VID OUT FORMAT
106 ASP RATIO LOCK
108 PANEL COM
110 PANEL DELAY
111 PANELVOL PRE
113 PANEL TYPE
116 VIDEO MUTE EN
117 FACT DEFAULT
Value Range Default Value
20 ~ 169 94
186 ~ 227 207
0 / 1 1
0 / 1 1
0 / 1 1
0 / 1 1
0 / 1 1
1 ~ 8, 255 255
0 / 1 0
0 / 1 0
0 / 1 1
0 ~ 7 2
0 ~ 7 2
0 / 1 0
0 / 1 0
0 ~ 17 0
0 ~ 255 255
0 ~ 255 255
0 ~ 255 255
0 ~ 255 255
0 / 1 0
0 ~ 5 5
0 / 1 0
0 ~ 2 1
0 / 1 1
0 / 1 1
0 ~ 2 2
0 / 1 1
0, 1, 2, 4, 5 2
0 ~ 4 4
0 / 1 1
0 ~ 255 0
0 ~ 2 1
0 / 1 0
0 ~ 3 2
0 ~ 15 8
0 ~ 100 20
0 ~ 4 2
0 / 1 0
0 / 1 0
Brief Description of Function and Comments
Selects poll rate for M.P.I.
Sets baud rate for M.P.I.
Set to 1 to enable Video 2 input.
Set to 1 to enable HDMI. Set to 0 to disable.
Set to 1 to enable panel HDMI 2 input.
Set to 1 to enable display panel Component 1 input jacks.
Set to 1 to enable display panel Video 1 input jack.
Sets the starting AUX source.
Set to 1 for M.P.I. AUX source to be reported as a channel number instead of Channel 0.
Set to 1 to disable Channel-Time display.
Set to 1 to enable custom color for the Text display.
Chooses custom foreground color for the Text display.
Chooses custom background color for the Text display.
If set to 1 and channel override is 0, "NOT AVAILABLE" message is displayed
when directly accessing a channel not in the favorite channel list.
If set to 1 and loss of M.P.I. communication occurs, TV tunes to Start Channel.
Allows TV timed power off press and hold setup with pillow speaker channel button.
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid M.P.I. checksum.
Relaxes M.P.I. timing to be compatible with PC based Windows-controlled systems.
Removes block hours setting for Parental Control and makes block permanent.
Set to 1 for DTV. Set to 2 for PC. Set to 0 to disable.
If set to 1, mutes audio if no signal is present.
Set to 1 to enable Component 2 input jacks.
Set to 1 for DTV. Set to 2 for PC. Set to 0 to disable.
Set to 0 to disable feature on Function menu. Set to 1 to enable feature on Function menu.
Sets default aspect ratio at power up. See detailed descriptions and item 106.
Selects ATSC band.
Sets ATSC tuning mode. Set to 0 for virtual channels, set to 1 for physical channels.
Selects Minor start channel. Set 0 for NTSC. Not 0, sets Minor channel number.
0=1080i, 1=720p, 2=480p
To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle.
0=1200, 1=2400, 2=9600, 3=115200
Sets panel delay time.
Preset Panel volume to achieve the same volume levels as other systems.
Selects panel type.
Set to 0 for normal, set to 1 for Blank.
0=Normal. 1=Loads factory default presets of all above settings.
P A G E 5 9