Zenith HCS5650 Installation And Operating Manual page 49

Installer Remote Control Key Functions for Channel Banks Menu
CHANNEL PREVIEW - BANK 1
CH 011-001 NORMAL-ADDED
Enter -> Change
CC ->VCHIP Menu Ch. Preview -> Exit
Channel Banks Status Chart
After 2-5-5+Menu
Shows selected Channel Bank.
Shows selected Channel or Aux source.
Shows channel status in selected bank.
In Channel Banks menu, use the Left/Right arrows to select:
Normal-Added Channel will appear in channel scan.
Normal-Delete Channel will not appear in channel scan.
Blank-Added Channel will appear in all channel banks, video will be
black, no picture, audio and CC will be present.
Blank-Deleted Channel will not appear in selected channel bank.
Note: A Blanked channel is blanked in all 4 channel
banks.
Enter Tunes in deleted channel.
Ch Preview Enters/Exits Channel Banks Setup menu
CC Goes to V-Chip menu.
Bank
Selects Channel Banks 1-2-3-4.
Ch Preview
Displays channel banks setup menu.
Exits menu.
Channel Up
Selects next higher channel number.
OK (Enter)
Tunes in deleted channels in scan.
Channel Down
Selects next lower channel number.
Number Keypad
Direct-enter deleted channel numbers in
selected channel bank then enter Ch Preview
menu to edit channel status.
Up/Down and Left/Right ADJ Arrows
Up/Down Tunes to added channels in menu.
Tunes to Aux Sources in menu.
Left/Right Chooses menu options.
P A G E 4 9