Unstable Screen; Checking The Strength Of Digital Signal - Zenith HCS5650 Installation And Operating Manual

Channel Control

Unstable Screen

- If a dashed line or no color appears, the screen is unstable, therefore
try channel adjustments.
(This is only available for analog broadcasting.)
Press the MENU button and then use the ADJ
1
to highlight the Channel menu and press the OK (Enter)
button.
Use the ADJ D
2
the OK (Enter) button.
Press the ADJ F
3
When finished, press MENU repeatedly to remove the menus.
4
Checking the Strength of the Digital Signal
- This shows the current digital signal strength as a picture.
(This is only available for digital broadcasting.)
Press the MENU button and then use the ADJ
1
to highlight the Channel menu and press the OK (Enter)
button.
Use the ADJ D
2
press the OK (Enter) button.
View the on-screen signal strength monitor to see the quality
3
of the signal being received.
When finished, press MENU repeatedly to remove the menus.
4
or E button to highlight Fine Tune and press
or G button to adjust.
or E button to highlight Signal Strength and
D or E button
--. -- ----
--. -- ----
D or E button
--. -- ----
--. -- ----
Antenna
Auto Program
Channel Label
Channel List
Fine Tune Auto
Signal Strength
--:-- --
D E
Move OK Select
Antenna
Auto Program
Channel Label
Channel List
Fine Tune
Signal Strength
--:-- --
F G
Adjust MENU Back
Antenna
Auto Program
Channel Label
Channel List
Fine Tune
Signal Strength
--:-- --
D E
Move OK Select
Antenna
Auto Program
Channel Label
Channel List
Fine Tune
Signal Strength
--:-- --
MENU Back
G
MENU Back
G
MENU Back
P A G E 2 5