Zenith HCS5650 Installation And Operating Manual page 58

Installer Menu (Continued)
Use the Installer's Menu to set up or change operational settings.
See more detailed descriptions of the Installer menu items on the following pages...
Accessing the Installer's Menu
Make sure TV is on. Installer's menu items can be accessed by using an installer's remote
control. Just press MENU repeatedly (at least 10 times) until the TV seems to stop
responding, then press 9, 8, 7, 6, then ENTER to access the Installer's menu. To remove
the Installer's menu, press ENTER again. Any changes you make will be stored in non-
volatile memory. (The menu also disappears automatically.)
The Installer's menu opens with item 000 INSTALLER SEQ 000. Use the Up/Down arrow
keys to sequence through the available menu items. Or, access an item directly by keying
in the line number, then pressing MENU. For example, to access the Sleep Timer option
which is item 015, press 0-1-5, then MENU. To change a setting, use the Left/Right
arrow keys. Or, enter a value directly.
Using the Installer's Menu
Items 000 ~ 117 are immediately accessible only upon entering the Installer's Menu.
Their numbers, descriptions, ranges, factory default settings, and a place for listing any
changes made on-site are given below and on the following pages.
Installer Menu Items 000 through 030
Menu Item Function
000 INSTALLER SEQ
001 POWER MANAGE
002 AC ON
003 BAND/AFC
004 STRT CHANNEL
005 CHAN LOCK
007 STRT VOLUME
008 MIN VOLUME
009 MAX VOLUME
010 MUTE DISABLE
012 IR BANKS EN.
013 SCAN MODE
014 STRT CH IN SM
015 SLEEP TIMER
016 EN TIMER
017 ALARM
020 FEATURE LEVEL
021 V-CHIP
022 MAX BLK HRS
023 CAPTION LOCK
025 FUNCTION PRE.
027 HOSPITAL MODE
028 CH. OVERIDE
029 OLD OCV
030 ACK MASK
P A G E 5 8
Value Range Default Value
0 ~ 3
0 ~ 7
0 / 1
0 ~ 3
0~125, 126, 127, 255
0 / 1
0 ~ 63, 255
0 ~ 63
0 ~ 63
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 / 1
0 ~ 99
0 / 1
0 / 1
0 ~ 2
0 / 1
0 / 1
0 / 1
000
Brief Description of Function and Comments
0
0 Sets number of hours of no activity before auto shut Off.
0 Set to 1 to enable auto turn On at power up.
1 Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC
255 Channel at turn-on (Set 255 to return to last channel before power Off).
0 If set to 1, cannot tune from current channel.
255 Sets Volume level at TV turn-on (Set 255 to retain last volume level).
0 Sets minimum allowable volume setting.
63 Sets maximum allowable volume setting.
0 Set to 1 to disable mute function.
0 Set to 1: enables TV to respond to IR code.
1 Typically used for Hospitals: puts On-Off in Ch Up/Down sequence.
0 Set to 1 to put TV on/off below start channel number.
1 Set to 1 to enable Sleep Timer.
1 Set to 1 to enable On/Off Timers.
1
1 Zen 1 Leave default set 1 (1 Zen 1)
1 Set to 1 to enable V-Chip functions.
12 Sets number of V-Chip (Parental Control) blocking hours.
0 Set to 1 to retain caption setting at power Off.
1 Controls channel preview in Pay-Per-View function.
2
1 If set to 0, limits direct access to favorite channels.
0 Set to 1 to change M.P.I. operation to OCV.
0 If set to 1, changes M.P.I. for some OCV boxes.
HCS5650XX PTC INSTALLER MENU
INSTALLER SEQ 000
UPN 000-000-000-000 FPGA 09F1
PTC V1.00.000 CPU V1.01.00
Typical Installer Menu
Leave default set to 0.
Set to 1 to enable Alarm.
Leave default set to 2.