Hardware Installations and Upgrades
Figure 20. Removing EMI Shield/Slide Assembly from Upper Device Bay
6.
Attach slides to the DVD or CD-ROM drive by pressing the slides firmly into the side dimples on the DVD-
or CD-ROM drive.
7.
Insert the drive/slide assembly into the upper device bay until the slides lock into place.
8.
Connect power and data cables.
9.
Install the front bezel. For instructions, see "Removing and Installing the Front Bezel."
10. Install the chassis cover. For instructions, see "Installing the Chassis Cover."
11. Plug all peripheral devices and the AC power cable into the server.
12. Power up the server.
26
Figure 21. Attaching Slides to a DVD or CD-ROM Drive
Intel® Server Chassis SC5600 Service Guide