Installing A 5.25-Inch Removable Media Device; Removing Emi Shields - Intel SC5000 Subassembly Product Manual

Installing a 5.25-inch Removable Media Device

Three 5.25-inch half-height bays provide space for tape backup, CD-ROM, or other removable
media drives.
NOTES
Save the EMI shields: EMI integrity and cooling are both protected by
having drives installed in the bays or EMI shields covering the bays. When
you install a drive, save the shield to reinstall in case you should later
remove the drive and not reinstall one in the same bay.
1. Open the front bezel door.
2. Remove the two screws that hold the shield in place.
3. Pull the shield out of the chassis. Save the shield for use if you remove the peripheral.
26
Figure 14. Removing EMI Shields
Intel SC5000 Server Chassis Subassembly Product Guide
OM09174