Changing Various Settings Of This Unit (Setup Menu); Speaker Setup; Sound Setup; Function Setup - Yamaha RX-V765 Owner's Manual

Changing various settings of this unit (SETUP menu)
You can change various settings of this unit using the SETUP menu. See "Basic operation of the SETUP menu" on the
next page, and other respective pages to change the settings.
• List of SETUP menu items
Menu/Submenu
Speaker Setup
I Auto Setup (YPAO)
2 Manual Setup
A)Config
B)Level
C)Distance
D)Equalizer
E)Test Tone
Sound Setup
I Dynamic Range
2 Lipsync
HDM! Auto
Auto Delay
Manual Delay
Function Setup
I HDMI
Control
Standby Through
Audio Output
Resolution
Aspect
2 Display
Dimmer
FL Scroll
OSD Shift
3 Volume
Adaptive DRC
Max Volume
Init. Volume
4 Input Rename
5 Zone2
Max Volume
In it. Volume
DSP Parameter
Memory Guard
Function
Sets items for speakers.
Automatically adjusts output characteristics of speakers.
Manually adjusts output characteristics of speakers.
Sets speaker configurations, such as connection status of speaker and a size of the
connected speaker (sound reproduction capacity), suitable for the listening
environment.
Separately adjusts volume of each speaker.
Adjusts timing at which each speaker outputs sound based on distances between
speakers and the listening position.
Selects an equalizer that adjusts speaker output characteristics.
Generates test tones.
Sets various items for sound outputs.
Adjusts dynamic ranges of speakers and headphones.
Adjusts delay in output timing between video signals and audio signals.
Sets on or off of automatic adjustments for delay between output timing between
video signals input from the HDMI jack and audio signals.
Fine adjusts a delay time of HDM! Auto.
Manually fine adjusts the delay of audio and video output.
Set various items for HDMI and display.
Sets various items for input sources.
Selects on or off of HDM! control functions.
Selects on or off of output of HDMI signals input from the HDMI 1-4 jacks to the
HDMI OUT jack when this unit is on standby.
Selects this unit or a component connected to this unit via the HDMI OUT jack of
this unit for reproducing sound signals input from the HDM! 1-4 jacks.
Sets resolution of the HDM! output that is converted from analogy video input
signals.
Set an aspect ratio of images reproduced by HDM! signals convened from analog
video input signals.
Set items for a monitor or the front panel display.
Sets brightness of the front panel display.
Selects the way to display characters on the front panel display.
Adjusts top and bottom positions of the OSD (on-screen display) menus.
Sets items for volumes.
Adjusts the dynamic range (difference between the maximum volume and the
minimum volume) in conjunction with the volume level.
Sets the maximum volume level so that the volume will not be accidentally
increased.
Sets the volume at the time this unit is turned on.
Changes input source names to be displayed on a video monitor or the front panel
display.
Sets the maximum volume level and initial volume level of Zone2.
Sets the maximum volume level so that the volume will not be accidentally
increased.
Sets the volume at the time this unit is turned on.
Sets parameters for the sound field programs.
Protects some settings against accidental alteration.
Page
54
54
54
54
56
56
56
56
56
56
57
57
57
57
57
57
57
57
57
57
58
58
58
58
58
58
58
58
58
59
59
59
59
59
59
53
En
I