Outputting A Video Signal Input From Another Input Source During Reproducing A Multi-Channel Audio Signal - Yamaha RX-V765 Owner's Manual

Setting the option menu for each input source (OPTION menu)
Input source: TUNER
Choices: 5ter'eo*/t'iono
Sets FM broadcasting receiving mode.
5+",,,t-'eo
keceives in stereo mode.
r'1ono
Receives in monaural mode. You can get a
better reception in monaural mode.
Input source: TUNER
Automatically detects radio stations in the FM frequency
band and registers them as preset stations (see page 31).
Input source: TUNER. XM, SIRIUS
When TUNER is selected: See page 32.
When XM is selected: See page 35.
When SIRIUS is selected: See page 39.
Input source: SIRIUS
Sets the Parental Lock (see page 40).
• Shuffle
Input source: iPod (DOCK)
Choices: Off*/50n'~:::./H 1 bur,',:::.
Changes the shuffle playback style (see page 43).
Input source: iPocl (DOCK)
Choices: Off*/OnE.'/H 11
Changes the repeat playback style (see page 43).
Input source:
Bluelooth
(DOCK)
Switches communication with a Bluetooth component on
and off (see page 44).
• F.::t:i.r·in9
Input source:
Blueloolh
(DOCK)
Performs pairing of this unit and a Bluetooth component
(see page 44).
• I.)
i (leo
OIJt
Input source: MULTI CH
Choices: RI)110 6/!)-RU></Off*
When the multi-channel input is selected, outputs a signal
input from another terminal to the video monitor. See
"Outputting a video signal input from another input source
during reproducing a multi-channel audio signal" on this
page.
48
En
When "MULTI CH" is selected as the input source, a
video signal input from another terminal can be output to
the video monitor. For example, even if an audio and
video component such as a DVD player that does not
support a multi-channel digital audio output, the video
signal can be output to the video monitor while
reproducing a multi-channel analog audio signal.
1
Rotate the @INPUT selector (or press
[IDMULTI) to change the input source to
"MULTI CH."
2
Press !IIDOPTION on the remote control.
The OPTION menu appears.
3
Press IDJCursor
f::.
I
V
to display "Video Out,"
and press IDJENTER.
The following screen appears.
!'1UL T! CH OPT! Otj
Uideo Out····Off
[-oIJ/[1>- J:
I)ideo
[Re!,.l.w·n
J :
F::e!,.l.w·n
4
Press IDJCursor
<:J
I
C>
to select a video input
jack to which a component to be used as a
video input source is connected.
- AVI-2 (COMPONENT VIDEO jacks)
- AV3-6 (VIDEO jack)
- V-AUX (VIDEO jack)
- Off (no video input)
5
To end the setting, press !IIDOPTION.