Download Print this page
Yamaha RX-V465 Firmware Update Procedures
Hide thumbs Also See for RX-V465:

Advertisement

Quick Links

________________________________________________________________________________
May, 2009
Subject: RX-V465/565/665/765 Firmware Update Version J030
Yamaha is pleased to offer the following firmware update to ensure the best possible performance and
features for your Yamaha RX-V465/565/665/765 AV Receiver. This firmware improves the video input
assignability to the analog audio input and stability for the HDMI connection with other CE products.
Requirements:
A personal computer capable of burning an audio CD
CD or DVD player* with digital audio connection (Optical or Coaxial, not HDMI)
*Note:
In some instances a DVD player or a BD player will not work for this update procedure,
so connecting a CD player is preferred
Note: CHECK THE UNIT'S FIRMWARE VERSION PRIOR TO DOING THIS UPDATE.
The firmware version consists of a letter followed by three numbers [ex. "J030"].
If the three numbers in the firmware version are 030 or higher, you DO NOT need to
perform this update.
How to check the unit's firmware version:
Press and hold the [STRAIGHT] button on the front panel and keep it pressed while you press
the [STANDBY/ON] button. Once the front panel displays "Advance Setup", release the
[STRAIGHT] button. Then, press and hold the [TONE CONTROL] button for about 3 seconds until
front panel display shows the version of firmware.
The following pages contain the firmware update instructions for Yamaha AV receiver
RX-V465/565/665/765. The outline of the update is as follows:
1.
Download the firmware
2. Connect digital audio with CD or DVD player
3. Enter firmware update mode
4. Play the update disc (Reprogramming)
5. Confirm update firmware version
Note: Executing this update will RESET the receiver's setting to factory default.
< IMPORTANT NOTICE >
Do not attempt to update your Yamaha receiver using any other data file except those provided
directly from the Yamaha website.
Follow the instructions carefully and do not attempt any other procedures not specified in the
instructions provided by Yamaha.
Improperly update products may cause improper operation, and any parts or service required to
restore proper operation will not be covered under the Yamaha Limited Warranty.
 
Firmware Update Procedure for RX-V465/565/665/765
and create an update disc (Audio CD)
Page 1 of 5

Advertisement

loading

Summary of Contents for Yamaha RX-V465

  • Page 1 May, 2009 Subject: RX-V465/565/665/765 Firmware Update Version J030 Yamaha is pleased to offer the following firmware update to ensure the best possible performance and features for your Yamaha RX-V465/565/665/765 AV Receiver. This firmware improves the video input assignability to the analog audio input and stability for the HDMI connection with other CE products.
  • Page 2   Firmware Update Procedure for RX-V465/565/665/765 565/665/765 ________________________________________________________________________________ ________________________________________________________________________________ Instructions for Firmware Update: Instructions for Firmware Update: Step 1. Click here to download the file. Unzip the downloaded content and burn the WAV file as an Audio-CD. This will be your update disc.
  • Page 3 PLAY is pressed on the CD/DVD player, your CD/DVD player may not work for this update. Contact your local Yamaha authorized service center to update the receiver for you. Step 6. When writing of the firmware is completed, “Update Success”, “Please...”...
  • Page 4 Step 9. Remove the firmware CD from the disc tray and close the disc tray. Step 10. Press the “STANDBY/ON” key of the DVD/CD player to turn off the power. Step 11. Press the “STANDBY/ON” key of the Yamaha receiver to turn off the power. Step 12. CHECK UPDATED VERSION Press and hold the [STRAIGHT] button on the front panel and keep it pressed while you press the [STANDBY/ON] button.
  • Page 5: In Case Of Error

    Step PL1. Unplug the AC power cable of the Yamaha receiver from wall outlet. Step PL2. On the front panel of the Yamaha receiver, press and hold the [STRAIGHT] button and keep it pressed, which you plug the AC power cord of the Yamaha receiver to wall outlet.

This manual is also suitable for:

Rx-v565Rx-v665Rx-v765