Yamaha RX-V765 Owner's Manual page 55

Yamaha rx-v765: user guide
Hide thumbs Also See for RX-V765:
Table of Contents

Advertisement

Editing surround decoders/sound field programs
Rev.Level parameter adjusts the reverberation sound level.
Increasing the value of Rev.Level makes the reverbration
sound level higher, which allows you to create more echo.
Source sound
Rear reverberation
(dB)
'-------'L..L..I...L..L-'--_'---"'-_ _
---'~
_
__"_ _
Time
Parameters only usable in certain sound
field programs
2ch Stereo only
[) i
r·l~c.+".
Choices:
Hu+..0 ''fOf"f
Automatically bypasses the DSP circuit and tone control
circuit when an analog sound source is selected as the
input source. This creates a higher quality sound.
f=iu+"o Outputs sound by bypassing the DSP circuit and
tone control circuit when the "Bass" and "Treble"
tone controls are both set to 0 dB.
Off
Does not bypass the circuits.
,',
:<il~
• See page 56 for equalizers that can be used with this unit.
7ch Stereo only
C:T
Lel.)e
It=';t..
L!::~l.)e :L/z::.;F:~
L..e '
.)E:lll
~;E;
Lel.)E=
I/F'L.
Le'')E=
I/F:i~~
Le'.}E,l
Adjustable range: 0
to
1
OO~·;
Adjusts the volume ofthe center (CT), surround L (SL),
surround R (SR), surround back (SB), presence L (PL)
and presence R (PR) channels in the 7ch Stereo program.
The available parameters differ depending on the setting
of the speakers.
Straight Enhancerl7ch Enhancer only
Choices:
Hi 9h"/LO',J
Adjusts the Compressed Music Enhancer effect level. To
reduce the effect, set this parameter to "Low."
52
En
Decoder parameters
You can customize decoder effects by setting the
following parameters. For kinds of decoders. see page 29.
When PUIx Music/PUI Music is selected
Choices:
Off*/On
Adjusts the soundscape of the front sound field. A small
value increases the soundscape and a large value narrows
it (makes the center more dominant).
Adjustable range: -3
to
~:'T[:'*
to
+~)
Adjusts the difference in level between the front sound
field and the surround sound field. You can adjust the
difference in level created by the software being played
back to obtain the preferred sound balance. The surround
sound gets stronger as you make the value more negative
and the front sound gets stronger as you make the value
more positive.
Adjustable range: 121
to
T"
[0
?
Spreads the center sound toward left and right according
to your preference. Set this parameter to 0 for outputting
the center sound from the center speaker only, or to 7 for
outputting it from the front left/right speaker.
When Neo:6 Music is selected
1-'
T -.', -
I I -
1_, II
J.I'I·::j:::1::z
Adjustable range: O.
(1
to
0.3*
to
1.
'3
Adjusts the front left and right channel output relative to
the center channel to make the center channel more or less
dominant as necessary.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents