HP 195294-001 - ProLiant - ML370R Setup And Installation Manual page 76

11. Install the PPM into the available PPM slot:
a. Align the key slot on the PPM with the PPM slot.
b. Press firmly to be sure that the PPM is fully seated in the slot (1). When the
PPM is fully seated, the slot latches close (2).
Figure 3-26: Installing a PPM
12. Reinstall the processor air baffle:
a. Align the screws on the processor air baffle with the screw holes on the
center wall.
b. Tighten the thumbscrews.
13. Reinstall the access panel.
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
Installing Hardware Options
3-31