Installing An Operating System - HP 195294-001 - ProLiant - ML370R Setup And Installation Manual

3. Observe the front panel LEDs for a successful power-up sequence.
Table 5-1 describes a successful power-up sequence.
Table 5-1: Front Panel LED Activity During the Power-Up
Sequence
Item
Power On/Standby LED
Internal health LED
External health LED
NIC LED
Note: For a detailed explanation of all system LEDs, refer to Appendix E,
"LED Indicators and Switches."
When the server powers on for the first time, the server performs POST and
launches RBSU. Select the initial language and operating system, then insert the
SmartStart CD in the CD-ROM to begin configuration.

Installing an Operating System

IMPORTANT: Before installing an operating system on a new server or previously
unconfigured boot drive, you must configure the server with RBSU.
To configure the server for the first time:
1. Start the server. The system automatically launches RBSU at initial startup.
2. When prompted, select a language.
3. Select the operating system you want to install on the server. A dialog box
displays, indicating that the system configuration is complete.
4. Press the F10 key to exit RBSU or press any other key to return to the RBSU
main menu.
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
Description
From amber to green
From off to green
From off to green
From off to green (when linked to the network)
From off to flashing green for network activity
Installing the Tower Server
5-5