HP 195294-001 - ProLiant - ML370R Setup And Installation Manual page 161

Server Cabling
IDE CD-ROM Drive
In the server, the CD-ROM drive is mounted in the top bay of the removable media
area. Figure 6-3 shows standard cable routing in a rack configuration for a
point-to-point IDE cable connecting the CD-ROM drive to the IDE connector on the
system board. For information about replacing the CD-ROM drive, refer to the
maintenance and service guide.
Figure 6-3: Cabling the CD-ROM drive to the system
board (rack server)
6-4 HP ProLiant ML370 Generation 3 Server Setup and Installation Guide