HP 195294-001 - ProLiant - ML370R Setup And Installation Manual page 180

Server Asset Text
The Server Asset Text menu option enables you to customize system-specific text
for the server. The following selections are available on this menu:
•
Set Server Info Text—allows you to identify the system with an Asset Tracking
Number. The default for this setting is disabled.
•
Set Administrator Info Text—allows you to list the name and contact
information for the administrator to the system.
•
Set Service Contact Text—allows you to list the name and contact information
for the responsible service contact for the system.
Advanced Options
The Advanced Options menu option enables you to configure advanced options of
the system. The following selections are available on this menu:
•
MPS Table Mode—allows you to change the APIC table setting. The APIC
table setting is automatically set by OS Selection, if Auto Set Table is selected.
The default for this setting is Auto Set Table.
•
Hot Plug Resources—allows you to select the amount of system resources
dedicated to the PCI Hot Plug capabilities. The default setting is Auto Set.
•
POST Speed Up—allows you to increase the POST speed during a system boot
by disabling the complete memory test. The default for this setting is enabled.
•
POST F1 Prompt—allows you to select whether the boot process stops, pauses,
or proceeds at a ROM initiated F1 prompt. The default is enabled (stop).
•
Redundant ROM Selection—allows you to use the current ROM or switch to
the backup ROM.
•
Erase Non-volatile Memory—allows you to reset the configuration settings to
their factory defaults. The default for this setting is enabled.
•
Erase NVRAM—allows you to reset the configuration settings to their factory
defaults and to erase the boot disk. For more information about this feature, refer
to the HP ROM-Based Setup Utility User Guide. The default for this setting is
enabled.
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
Server Configuration and Utilities
7-7