HP 195294-001 - ProLiant - ML370R Setup And Installation Manual page 222

Troubleshooting
Table D-7: Problems After Initial Boot
Problem
SmartStart fails
during installation.
CAUTION: The System Erase Utility causes loss of all configuration information, as well
as loss of existing data on all connected hard drives. Before performing this operation,
refer to the Servers Troubleshooting Guide for information on running the System Erase
Utility.
D-14
continued
Possible Cause
Error occurs during
installation.
CMOS is not cleared.
HP ProLiant ML370 Generation 3 Server Setup and Installation Guide
Possible Solution
Follow the error information provided. If it is
necessary to reinstall, run the System Erase
Utility. Read the caution in this table. Refer to the
instructions in the Servers Troubleshooting Guide.
Run the System Erase Utility. Read the caution in
this table. Refer to the instructions in the Servers
Troubleshooting Guide.
continued