Installing The Full Length Pci Card Guide - Dell PowerEdge 1550 Self-Study Manual

DCSE: PowerEdge 1550 Self-Study
Page 62

Installing the Full Length PCI Card Guide

Follow this procedure to install the full length PCI card guide.
# Installing of the Full Length PCI Card Guide.
65. Before removing a cooling fan you must extend the PowerEdge 1550 in the rack.
66. To remove a cooling fan, perform the following steps:
Identify the location to place the full length PCI Card Guide. The thumbscrew secures into
the screw hole identified by the red circle in the image that follows and the tab on the guide
fits into the slot indicated by the red square in the image that follows.
67. Fit the tab into the slot as indicated by the text above that advises the proper orientation of
the guide and tighten the thumbscrew. A number 2 Phillips screwdriver may be required for
this task.
NOTE: An image showing the insertion of the full length PCI card guide has not been included
because it would have been obscured.
Version 0.3, 4 December, 2000
Dell