Disassembly And Re-Assembly Of The Poweredge 1550; Goals; Description; Tools/Aids/Materials - Dell PowerEdge 1550 Self-Study Manual

Disassembly and Re-assembly of
the PowerEdge 1550

Goals

The following are the goals for this exercise.
Disassemble the PowerEdge 1550 to the FRU level.
Recognize the FRUs for the PowerEdge 1550.
Recognize the FRU replacement dependencies of the PowerEdge 1550.
Reassemble the PowerEdge 1550 to the point of ready to power up.

Description

This section provides the information required for disassembly and re-
assembly of the PowerEdge 1550. It enumerates the necessary tools and
provides a list of parts that can be replaced. Then it provides instructions
for removal of all the field replaceable units (FRU) and then addresses the
specific issues relevant to re-assembly of the PowerEdge 1550. More
detailed instructions for disassembling each component are available in
the technical documentation and/or on Dell's web site.

Tools/Aids/Materials

The following tools/aids/materials are required to disassemble and re-
assemble the system.
Flat Blade screw driver.
Electro-static discharge wrist strap.

Disassembly/Re-assembly Overview

The procedures in this section are organized in a manner that allows a
technician to locate instructions on removing a part. Replacing a part, as
advised in the reassembly section, is the reverse procedure of removing a
part. Included in the instructions for part removal is a list of dependencies
to that task. This makes the procedures more manageable and advises the
technician what tasks must be done in preparation for part removal.
Version 0.3, 4 December, 2000
Dell
DCSE: PowerEdge 1550 Self-Study
Page 33