Removing The Poweredge 1550 Rack Mounting Hardware; Removing The Poweredge 1550 From A Rack - Dell PowerEdge 1550 Self-Study Manual

# Installing the Cable management Arm
14. The following picture shows a close-up of the support bracket with the cable management
arm attached. The side that is completely square connects to the rail.

Removing the PowerEdge 1550 rack mounting hardware

To remove the PowerEdge 1550 rack mounting hardware follow the steps
for installing it in reverse.

Removing the PowerEdge 1550 from a rack

There are two different but similar procedures that are performed for
different reasons. The PowerEdge 1550 is designed to provide access to
every field replaceable unit while the system is in the rack. The first
procedure, Extending the PowerEdge 1550 in the Rack, indicates how to
make the field replaceable units accessible for service. Occasionally, such
as migrating the system from one rack to another, the system may need to
be removed from the rack altogether. The second procedure shows how to
do this.
Version 0.3, 4 December, 2000
Dell
DCSE: PowerEdge 1550 Self-Study
Page 41