Removing The Control Panel - Dell PowerEdge 1550 Self-Study Manual

DCSE: PowerEdge 1550 Self-Study
Page 54

Removing the Control Panel

Follow this procedure to remove the control panel.
# Removing the Control Panel.
37. Before removing the backplane you must remove the following:
The top cover.
The backplane.
38. To remove the control panel, perform the following steps:
Locate the hook underneath the control panel carrier.
39. Pull the carrier forward to expose the chassis intrusion switch cable.
40. Disconnect the chassis intrusion switch cable and the control panel cable.
41. Continue pulling the control panel forward until it is out of the computer.
Version 0.3, 4 December, 2000
Dell