Figure 131. Installing the Riser 4 blank
Next steps
1.
Replace the full length expansion card
Installing the full length expansion card risers
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in
3. If installed,
remove the GPU air shroud
4. If removed,
install the GPU into the expansion card
5. If installing full length expansion card riser for the first time,
Steps
1. If installed, remove the riser blanks by loosening the captive screws.
NOTE:
Store the Riser blanks for future use. Filler brackets must be installed in empty expansion card slots to maintain
Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of the
system and aid in proper cooling and airflow inside the system
riser.
Safety
instructions.
Before working inside your system
filler.
risers.
remove the air shroud
and replace it with
Installing and removing system components
the GPU air
shroud.
125