Removing The System Board - Dell PowerEdge 1550 Self-Study Manual

# Removing a Processor or a Terminator.
55. Repeat this procedure for the second processor or the terminator if applicable.

Removing the System Board

Follow this procedure to remove the system board.
# Removing the System Board.
56. Before removing the system board you must remove the following:
The top cover.
The memory.
The processor(s).
57. To remove the system board, perform the following steps:
Disconnect any wires that are connected to the system board.
58. Loosen the thumbscrew.
Version 0.3, 4 December, 2000
Dell
DCSE: PowerEdge 1550 Self-Study
Page 59