Dell Precision YT583 User Manual page 82

Auto Power
Time
Low Power
Mode
(Off
default)
Remote
Wakeup
(Off
default)
Suspend Mode
Maintenance
Service Tag
ASF Mode
SERR Message
(On default)
82
System Setup
Sets time to automatically turn on the computer.
Time is kept in the standard 12-hour format (hours:minutes).
Change the startup time by pressing the right- or left-arrow
key to increase or decrease the numbers, or type numbers in
both the date and time fields.
When Low Power Mode is selected, remote wakeup events will
no longer power up the computer from Hibernate or Off via the
onboard network controller.
This option allows the system to power up when a Network
Interface Controller (NIC) or Remote Wakeup-capable modem
receives a wake up signal.
On is the default setting. On w/ Boot to NIC will allow the
computer to attempt to boot from a network prior to using the
boot sequence.
NOTE:
Normally, the system can be powered up remotely from
suspend mode, hibernate mode, or when powered off. When
Low Power Mode (in the Power Management menu) is enabled,
the system can only be powered up remotely from Suspend.
Sets the computer's suspend mode. The options are S1, a
suspend state in which the computer is running in a low-
power mode, and S3, a suspend state in which the power is
reduced or turned off for many components, however, system
memory remains active.
Displays the service tag for your computer.
Controls ASF management.
• On = Full ASF 2.0 functionality (RMCP)
• Alert Only - send ASF messages on event or error
• Off - all ASF functionality disabled
Some graphics cards require that the SERR message be
disabled.