Dell Precision YT583 User Manual page 241

6 Slide the sliding-plate lever to release the shoulder screw and slide the
hard-drive carrier out of the 5.25-inch drive bay.
1
2
1 sliding-plate lever
7 Press the blue tabs on each side of the hard-drive bracket toward each
other and slide the drive up and out of the hard-drive carrier.
8 Set the drive and carrier aside in a secure location.
9 Ensure that all connectors are properly cabled and firmly seated.
10 If you are not installing another drive in the drive bay, install a drive panel
insert (see "Replacing a Drive-Panel Insert" on page 249).
11 Reinstall the drive panel (see "Replacing the Drive Panel" on page 249).
2 optional fifth hard drive
NOTE:
The optional fifth SATA hard drive can be
installed in any of the 5.25-inch drive bays.
Adding and Replacing Parts
241