1
floppy drive
7 Press down the release lever on the side of the drive carrier and pull the
drive out.
8 If you are not installing another drive in the drive bay:
Reinstall the empty drive carrier by sliding it back into the drive bay
a
until it clicks into place.
If you later decide to install another floppy drive or a Media Card
Reader in that drive bay, you can slide it into the drive carrier without
removing the carrier from the drive bay.
Install a drive panel insert (see "Replacing a Drive-Panel Insert" on
b
page 249).
1
2
floppy drive carrier
Adding and Replacing Parts
2
253