Dell Precision YT583 User Manual page 197

1 release tab
5 If you are installing a new card, remove the filler bracket to create a card-
slot opening. Then continue with step 7.
NOTICE:
Ensure that you release the securing tab to unseat the card. If the card is
not removed correctly, the system board may be damaged.
6 If you are replacing a card that is already installed in the computer, remove
the card:
If necessary, disconnect any cables connected to the card.
a
If the card is full-length, press the release tab on the end of the
b
alignment guides on the fan bracket.
If the connector has a release tab, press the release tab as you grasp the
c
card by its top corners, and ease it out of its connector.
7 Prepare the card for installation.
2 card retainer
Adding and Replacing Parts
1
2
197