Exit Screen; Performing Configuration Tasks; Creating A Raid Level 0 Configuration - Dell Precision YT583 User Manual

Dell workstation user's guide
Table of Contents

Advertisement

Exit Screen

It is important to exit the RAID Configuration Utility properly, because some
changes take effect only when you exit. From the Adapter List, press <Esc>
to exit. In addition, a similar exit screen appears when you exit most other
screens, and it can be used to save settings.

Performing Configuration Tasks

NOTICE:
You will lose any data on your hard drives when you create a RAID
configuration using the following procedures. Back up data that you want to keep
before continuing.
NOTE:
Your RAID array cannot exceed 2 Terabytes in size. Any space beyond the 2-
Terabyte limitation will not be usable.
The two options for creating a new RAID volume are Create IM Volume and
Create IS Volume. IM stands for integrated mirroring. IS stands for integrated
striping. Additional information is available on the configuration screen.

Creating a RAID Level 0 Configuration

NOTE:
RAID 0 does not provide any data protection in the event of hard drive
failure. It is primarily used to increase performance.
NOTE:
Once the number of hard drives in a RAID volume (virtual disk) is set, it
cannot be changed.
Follow these steps to create a RAID 0 volume on a SAS 6/iR controller that
does not currently have a RAID volume configured.
1 Select a controller from the Adapter List in the Configuration Utility.
2 Select the RAID Properties option.
3 Select Create IS Volume when you are prompted to create either an IS
(striped) RAID volume or an IM (mirrored) RAID volume.
The next screen shows a list of hard drives that can be added to a RAID
volume.
4 Move the cursor to the RAID Disk column. To add a hard drive to the
RAID volume, change "No" to "Yes" by pressing the <+>, <->, or space
bar. As hard drives are added, the Virtual Disk Size field changes to reflect
the new size of the RAID volume.
Advanced Features
45

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Precision t7400

Table of Contents