Dell Precision YT583 User Manual page 236

CAUTION:
maximum system stability. Failure to install the stand could result in the computer
tipping over, potentially resulting in bodily injury or damage to the computer.
5 Remove the computer cover (see "Removing the Computer Cover" on
page 141).
6 Verify that the hard-drive bay is empty. If there is a hard drive bracket
installed, remove it: press its tabs toward each other and pull it out of the
bay.
If there is a drive installed in the bay, remove it (see "Removing a Hard
Drive (Hard Drive Bays 1-4)" on page 230).
7 Slide the hard drive into the hard-drive bay until it clicks securely into
place.
1
2
236
Adding and Replacing Parts
The computer stand should be installed at all times to ensure
1 hard drive 2 hard drive bay