Table of Contents
Advertisement
FOR OWNERS OF THE QUARTZ DATE MODEL
Setting the Date/Time
1. Press the mode button to choose
the data imprinting format.
• M will appear above the month.
2. Use the select button (SEL) to
move between different parts of
the displayed data.
• The selected part will blink, indicating that it is
the data to be changed.
3. Press the adjust button (ADJ) to
change the data to the correct
value.
• Data continues changing as long as the button is
held down.
• In time mode, pressing the ADJUST button while
: is blinking resets the seconds counter to zero
(not shown).
4. When all data is correct, press the
select button (SEL) until the data
stops blinking.
68
FOR OWNERS OF THE QUARTZ DATE MODEL
Replacing the Battery
The quartz data back uses a CR2025 lithium battery, located on the
inside of the back cover. Replace the battery if the display or
imprinted data becomes dim.
1. Open the back cover.
2. Using a coin or similar object,
3. Remove the old battery and
4. Replace the battery cover,
turn the battery cover
counter-clockwise, then
remove it.
replace it with a new one.
• The + side should face up.
then reset the date and time.
69
Hide quick links:
Advertisement
Table of Contents
