Setting The Date And Time - Minolta Dimage F100 Instruction Manual

G
ETTING UP AND RUNNING

Setting the date and time

After initially inserting a memory card and battery, the camera's clock and calendar
must be set. When images are recorded, the image data is saved with the date and
time of recording. Depending on the region, the menu language may also have to be
set. To change the language, see the camera notes on the following page.
Turn the mode dial on the top of the camera to the setup position. The
camera will turn on and the setup menu will be displayed.
Navigating the menu is simple. The up/down and left/right keys of the
controller (1) move the cursor and change settings on the menu.
The central button of the controller selects menu options and sets adjust-
ments.
Setup
Basic Custom1 Custom2
LCDbrightness –
–
Format
Power save 1 min.
Language English
20
Basic
Reset default
Date/Time set
Date format
Video output
Playback menu: custom 2 section
Use the left and right keys to select the item
to be changed.
Use the up and down keys to adjust the item.
1
Press the central button to set the clock and
calendar. The setup menu will be displayed.
Camera notes
For customers in certain areas, the menu language must also be set. Highlight the lan-
guage option in the basic section of the setup menu. Press the right key to display the
language settings. Using the up/down keys, highlight the desired language. Press the
central button to set the highlighted language; the setup menu will be displayed in the
selected language.
Use the right key to highlight the
Custom1 Custom2
custom 2 tab at the top of the menu.
–
Use the down key to highlight the
–
date/time-set menu option.
YYYY/MM/DD
NTSC
Press the right key. "Enter" will
appear on the right side of the menu.
Press the central button to display the
date/time setting screen.
Date/Time set
Enter
Date/Time setting screen
21