Flash Slow Sync - Minolta DYNAX 404SI MAXXUM STSI Instruction Manual

EXPOSURE – Multiple Exposure
Cancelling Multiple Exposure
1. Turn the function dial to
2. Press the function button and
Sliding the main switch to LOCK does not cancel multiple
exposure mode.
60
turn the control dial until OFF
appears in the data panel.
FLASH – Slow Sync
.
Slow-shutter Sync
In P and A-modes, slow-shutter
sync sets a slower shutter speed to
increase the background or ambient
lighting exposure in a flash picture.
Flash output will automatically be
decreased to maintain a correct
exposure of your subject.
Conventional Flash
1. Frame your subject.
2. While pressing the spot/AE
lock button, press the shutter-
release button all the way
down to take the picture.
• If the background is bright or a large
aperture is set (A-mode), the shutter speed
may not be reduced.
• Use a tripod if the shutter speed becomes
too slow to allow sharp, hand-held pictures
after you press the spot/AE lock button.
• and the locked exposure will be
displayed in the viewfinder.
61