Changing Camera Functions; Appendix; Program Reset Button - Minolta DYNAX 404SI MAXXUM STSI Instruction Manual

CHANGING CAMERA FUNCTIONS

Spot/AE Lock Button Operation
Slide the Main switch to LOCK, then to ON
while pressing the Program-reset button
and Spot/AE lock button.
• Repeat the above procedure to return to the
previous setting.
Press to activate, release to cancel.
Press once to activate, press again to cancel.
AF Illuminator (Built-in Flash) Function
Slide the Main switch to LOCK, then to ON
while pressing the Flash-mode button.
• The status of the AF illuminator is displayed in
the data panel.
AF IIluminator On
When the built-in flash is up, its AF illuminator fires
when necessary to assist focus.
• The AF illuminator does not fire when flash cancel (
selected.
AF Illuminator Cancelled
The built-in flash's AF illuminator will not fire.
• An attached accessory flash's AF illuminator will not be
cancelled.
• Other flash functions will operate normally.
70

Program Reset Button

Press the program-reset button to return the following camera
functions to their program settings.
FUNCTION
Exposure mode
Focus mode
Flash mode
Exposure Compensation
Film-drive mode
Self-timer
Wireless/Remote Flash
Bracketing
Multiple Exposure
) is
• Date, red-eye reduction, ISO settings will not change.
• Pressing the program-reset button will also reset an attached
dedicated accessory flash's program settings. Refer to the flash
instruction manual for details.
• Spot/AE lock button function, AF illuminator function will not change.

APPENDIX

P-MODE SETTING
P mode
Autofocus
Auto-on
+/– 0
Single-frame advance
Cancelled
Cancelled
Cancelled
Cancelled