Taking Time Exposures (Bulb) - Minolta DYNAX 404SI MAXXUM STSI Instruction Manual

Hide thumbs Also See for DYNAX 404SI MAXXUM STSI:
Table of Contents

Advertisement

TAKING TIME EXPOSURES (buLb)

Set the shutter speed to bulb
when you want to take time
exposures. When bulb is selected,
the shutter remains open as long
as the shutter-release button is
pressed.
1. Mount the camera on a tripod.
2. Set the camera to M-mode,
3. Press the exposure-
4. Compose the scene and
48
then turn the control dial until
appears in the data
panel.
compensation button and turn
the control dial to select the
aperture.
focus on your subject.
• If the scene is too dark for autofocus to
operate, press the focus-mode button
and focus the lens manually (p51).
TAKING TIME EXPOSURES (buLb)
5. Firmly press the eyepiece cap
6. Press and hold the shutter-
Attaching the Remote Cord
To reduce image blur, attach either the Remote Cord RC-1000S or
RC-1000L (sold separately).
1. Flip the remote-control-
2. Insert the plug into the
into the eyepiece.
• The eyepiece cap prevents light from
entering thru the viewfinder and affecting
the metered exposure.
release button to take the
picture.
• The shutter remains open as long as the
button is pressed.
terminal cover up.
terminal.
49

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dynax 404 siMaxxum st si

Table of Contents