Rewinding The Film - Minolta DYNAX 404SI MAXXUM STSI Instruction Manual

REWINDING THE FILM

Automatic Rewind
After you have exposed the last frame, the camera will automatically
rewind the film. When the film is completely rewound, the motor will
stop and will blink in the data panel indicating it is safe to open
the back of the camera.
1. Wait until the film is
2. Slide the back-cover release
3. Remove the film, then close
Manual Rewind
Use manual rewind to rewind the film before the current roll is
finished.
1. Press the manual-rewind
2. Follow steps 1-3 from
28
completely rewound.
• will appear and will blink in the data
panel.
down to open the back cover.
the back cover.
button.
Automatic Rewind.
LEVEL II
Now that you are comfortable with the operation of the
camera, take more control of the creative process by
telling the camera what kind of picture you want to take.
The subject program modes let you take more control
without leaving the program exposure mode. In each of the
subject program modes, the camera will automatically set the
best possible shutter speed and aperture for the type of picture
you are taking.
This section also lets you explore the use of the Self-timer and
Continuous Advance modes.
Subject Program Selection
Portrait Mode
Landscape Mode
Close-Up Mode
Sports Mode
Night Portrait Mode
Photographing Night Scenes
Drive Mode
Self Timer
Continuous Advance
Each of these functions can be explored independently after Level I
has been mastered.
• Press the program-reset button to return the camera to Full-Auto operation.
Page
30
31
32
33
34
35
Page
36
37