Lens - Minolta DYNAX 404SI MAXXUM STSI Instruction Manual

LENS

Attaching the Lens
1. Remove the body and rear
2. Align the red mounting dots
3. Gently insert the lens into the
14
lens caps.
on the lens and camera body.
mount, then turn it clockwise
until it clicks into the locked
position.
• Do not insert the lens at an angle.
• Do not press the lens release when
attaching the lens.
LENS
Removing the Lens
1. Press the lens release and
2. Gently remove the lens and
Caution
• Do not force the lens if it does not turn smoothly.
• Do not touch the inside of the camera, especially the lens
contacts and mirror.
turn the lens counter-
clockwise until it stops.
replace caps, or attach
another lens.
15