FLASH – Wireless/Remote Flash
Cancelling Wireless/Remote Flash Mode
1. Attach the accessory flash to
2. Turn the function dial to WL.
3. Press the function button and
4. Detach the accessory flash.
66
the camera, then turn the
flash on.
turn the control dial until WL
and OFF appear in the
camera's data panel.
FOR OWNERS OF THE QUARTZ DATE MODEL
The Quartz-data function lets you record the date or time onto the
lower-right corner of the photograph. The quartz data back has an
automatic calendar through the year 2019.
• Imprinted data may be difficult to read if the lower-right corner of the
photograph is bright or non-uniform.
• Imprinting size and position may differ according to printing conditions.
• Do not use the data back when temperatures exceed the operating range of
0 to 50 °C (32 to 122 °F).
Mode button
Exposing the Date/Time
Before taking the picture...
1. Press the mode button to choose
the data imprinting format.
• The display changes as follows:
2. Take the picture.
• If the print indicator blinks after the shutter is
released, the data was exposed.
Print indicator
Select button
Adjust button
67