Rewinding The Film - Minolta Maxxum Dynax 7 User Manual

Hide thumbs Also See for Maxxum Dynax 7:
Table of Contents

Advertisement

USING THE BUILT-IN FLASH
Flash Range
The range of the built-in flash depends on the speed of the film and
the selected aperture. Make sure your subject is within the flash
range specified in the table below.
Aperture
ISO 100
1.0 ~ 4.3m
f/2.8
(3.3 ~ 14.1 ft.)
1.0 ~ 3.4m
f/3.5
(3.3 ~ 11.2 ft.)
1.0 ~ 3.0m
f/4
(3.3 ~ 9.8 ft.)
1.0 ~ 2.1m
f/5.6
(3.3 ~ 6.9 ft.)
Lens Shadowing
Lens shadowing occurs when the lens or lens hood blocks part of
the output from the built-in flash. Lens shadowing appears as semi-
circular shaded area at the bottom (horizontal) or side (vertical) of
your image.
• Make sure you are at least 1m (3.3 ft.) from your subject when using
the built-in flash.
• Remove the lens hood before using the built-in flash.
• Lens shadowing may occur with the following lenses at shorter focal
lengths.
AF Zoom 17-35mm f/3.5G
AF Zoom 28-85mm f/3.5-4.5
• The built-in flash can not be used with the following lenses:
AF 300mm f/2.8 (APO tele)
AF 300mm f/4 (APO tele)
32
ISO 200
ISO 400
1.0 ~ 6.1m
1.0 ~ 8.6m
(3.3 ~ 20.0 ft.)
(3.3 ~ 28.2 ft.)
1.0 ~ 4.8m
1.0 ~ 6.8m
(3.3 ~ 15.7 ft.)
(3.3 ~ 22.3 ft.)
1.0 ~ 4.2m
1.0 ~ 6.0m
(3.3 ~ 13.8 ft.)
(3.3 ~ 19.7 ft.)
1.0 ~ 3.0m
1.0 ~ 4.3m
(3.3 ~ 9.8 ft.)
(3.3 ~ 14.1 ft.)
AF Zoom 28-70mm f/2.8G
AF Zoom 28-135mm f/4-4.5
AF 600mm f/4 (APO tele)

REWINDING THE FILM

Automatic Rewind
The film is automatically rewound after the last frame is exposed.
1. Wait until the film is completely
rewound.
• Do not open the back cover until this
message appears in the navigation
display. Never use force.
2. When the film is completely
rewound, open the back cover
and remove the film.
• If the manual rewind button is pressed while the film is rewinding, the
rewind speed will change.
33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Maxxum 7

Table of Contents