NEC POWERMATE 5100 Manual page 64

Hide thumbs Also See for POWERMATE 5100:
Table of Contents

Advertisement

Menu Item
Transfer Mode
Ultra DMA
Floppy Options
Floppy disk controller
Diskette A:
Floppy Write Protect
DMI Event Logging
Event log capacity
3-16 Configuring the System
Advanced Menu Items
Settings (default is bold) and Description
Standard
Fast PIO Mode 1
Fast PIO Mode 2
Fast PIO Mode 3
Fast PIO Mode 4
FPIO3 & Bus Mastering
FPIO4 & Bus Mastering
When Type is set to Auto, the value in the
Transfer Mode field is auto-detected and the field
is read only.
Disabled, Mode 0, Mode 1, Mode 2
When Type is set to Auto, the value in the Ultra
DMA field is auto-detected and the field is read
only.
Bring up submenu by pressing Enter.
Enabled, Disabled
This field enables the diskette drive interface
connector on the riser board.
Disabled
360 KB 5 1/4"
1.2 MB 5 1/4"
720 KB 3 1/2"
1.44/1.25 MB 3 1/2"
2.88 MB 3 1/2"
Disabled, Enabled
Set the field to Enabled to write-protect diskettes.
Bring up the submenu by pressing Enter.
This field is read-only and cannot be changed
from the BIOS Setup utility.
Example: Space Available

Advertisement

Table of Contents
loading

This manual is also suitable for:

Powermate 5100 series

Table of Contents