Table of Contents
Advertisement
2. Fit the cover into the chassis, making sure that the tabs
along the lower left edge of the cover are aligned with the
slots on the left side of the chassis. In addition, make sure
the five tabs on the right side of the cover engage the
securing rail on the edge of the chassis.
A – Slot (1 of 7) B – Tab (1 of 7) C – Tab (1 of 5)
D – Metal Securing Rail
3. Slide the cover forward to meet the front panel.
Note:
not slide all the way to the front panel, place one
hand on the front of the unit while you slide the
cover forward from the rear.
5-8 Installing Options
Replacing the cover
The cover fits tightly. If the cover does
Advertisement
Table of Contents
