Table of Contents
Advertisement
2. Exit the application program.
3. Make sure that the hard drive, diskette drive, and any
drives are not in use. A lit device lamp indicates that the
device is in use.
Wait until a program is finished running before
powering off the system.
Unless absolutely necessary, never power off the
system when the system power lamp is amber or
when either the hard drive lamp, diskette drive,
or other device lamp is lit. Information on the
device might be lost or damaged.
4. Click
Start
. Selecting
Down
the pop-up submenu. Select
then click
Yes
Note:
when it is safe to turn off the system.
5. Turn off power to the monitor.
6. Power off the system by pressing the system unit power
button. The system powers off after a 5- to 10-second
delay.
2-6 Setting Up the System
! CAUTION
on the taskbar, then point to and click
gives you several choices in
Shut Down
Shut down the computer
or press
Enter
to shut down the computer.
A message appears informing you
Shut
,
Advertisement
Table of Contents
